Z-Wave Dimmer 0-10V Zooz 700 Series S2 Z-Wave ZEN54 EU DIY Smart! Home Assistant HomeSeer

PRODUCT HIGHLIGHTS

• Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs)
• Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A
• 700 series Z-Wave chip: more range, reliable coverage
• Advanced settings to customize minimum or maximum brightness level and more*
• Built-in signal repeater: keep your mesh network stable and your system fast
• SmartStart and S2 authenticated security for a truly protected smart home
• Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
• Pigtail wires included for quicker set-up

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub/controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

Z-WAVE FREQUENCY

• EU/UK: 868.42 MHz

INSTALLATION

Before installing, make sure your fixture uses a 0-10 V dimming driver which doesn't exceed 4 Amps. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Here are some helpful wiring tips:

• • Make sure the gang box you are about to install the switch has power with neutral wire available - you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
  • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

How to include the 0-10 V Dimmer to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
3. A new dimmer switch should appear on your hub's device list

WORKS WITH

• FIBARO
• Ezlo Plus (no access to advanced parameters on Android app)
• Ezlo Secure (no access to advanced parameters on Android app)
• Home Assistant (Z-Wave JS)
• HomeSeer
• Hubitat (custom driver needed)
• SmartThings (Edge driver needed)
• Vera

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Frequency: 868.42 MHz
• Power: 120-240 VAC, 50/60 Hz
• Maximum Loads: 4 A, 480W at 120V, 960 W at 240V
• Maximum A rating: 200 mA
• Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
• Operating Temperature: 32-104° F (0-40° C)
• Installation: Indoor use only

RESOURCES

Download the Manual for the Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR (PDF)

Advanced Settings

Support Portal