Recommended products

PRODUCT HIGHLIGHTS

• Save space and money with this smart double relay
• Control 2 switches with 1 Z-Wave device: connect the double relay to 2 120V loads for independent smart control from your Z-Wave hub or wall switch
• Great for double gang box switch automation or to add Z-Wave to a fan / light installation for individual control of the motor and bulbs
• Wires behind the wall switches or at the fixture (if you don't have a neutral in the switch box)
• 700 series Z-Wave: the latest tech for faster communication and better range
• SmartStart with S2 authenticated security with encrypted signal
• Pigtail wires for easy installation
• Smart bulb mode: disable manual and/or Z-Wave control and turn your smart bulbs on or off using wireless signal only
• Scene control: 7 multi-tap triggers available for each relay (available on hubs that support multi-tap triggers*)
• Multicolor LED indicator to guide you through the set-up process
• Compatible with quality LED and incandescent bulbs (don't connect to ballast tube lights, switched receptacles, or fans over 1/4 hp; NOTE: FEIT bulbs are not recommended)
• Acts as a Z-Wave extender: get more signal for your network with this 700 series repeater

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

 PRODUCT HIGHLIGHTS

• Instant motion detection that just works
• Perfect for security monitoring and light automation
• NEW 800 series Z-Wave chip: more range for reliable wireless communication
• CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS)
• The most flexible and dependable magnetic base
• Battery or USB powered (cable sold separately) >> Use it as signal repeater when on USB (click here for instructions) - NOT A RECHARGEABLE BATTERY
• 8 levels of motion sensitivity to choose from
• Smart LED indicator >> Use it as a range test tool or turn it off completely straight from the device
• SmartStart and S2 authenticated security

PRODUCT HIGHLIGHTS

• Security alerts: Get instant motion reports to your Z-Wave hub whenever movement is detected.
• More climate data: Monitor temperature outdoors or indoors and use this information to trigger connected devices in your system.
• Smart lighting: program your Z-Wave outdoor lights to come on when the Zooz sensor reports motion and lux levels below your preferred set point
• Power it with 2 CR123A batteries (included) or a 12-24 V AC/DC connection (sold separately)
• Works as Z-Wave signal repeater when powered with 12-24 V AC/DC (do NOT pair the sensor on USB cable and then switch to batteries)
• 800 series Z-Wave chip: more range for reliable wireless communication
• SmartStart and S2 authenticated security
• Advanced settings to customize your sensor, including the ability to disable reporting for any sensor
•  CHECK HUB COMPATIBILITY BEFORE BUYING (NOT SUPPORTED BY WINK OR ALARM PANELS) 
• Modern minimal design with a multi-directional mini mounting bracket

PRODUCT HIGHLIGHTS

• Security monitoring: get motion alerts sent to your Z-Wave hub whenever activity is detected
• Climate control: use this sensor to trigger your smart thermostat or humidifier based on regular precise temperature and humidity readings
• Smart lighting: program your Z-Wave switches and smart bulbs to come on when the Q sensor reports motion and lux levels below your preferred set point
• Power it with 2 CR 123A batteries (included) or a micro USB cable (sold separately, scroll down to shop)
• Works as Z-Wave signal extender when powered via USB (do NOT pair the sensor on USB cable and then switch to batteries)
• NEW 800 series Z-Wave chip: more range for reliable wireless communication
• SmartStart and S2 authenticated security
• Advanced settings to customize your sensor
•  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS) 
• Modern minimal design with a multi-directional mini mounting bracket

NEW 800 SERIES

PRODUCT HIGHLIGHTS

• All NEW 800 Series Z-Wave radio USB stick: incredible signal, super secure, and fast network!  
•  NOTE: Do NOT perform NVM backup from 500 series or 700 series Z-Wave sticks for this device, this feature is currently not supported and will brick the product . Please read this article before attempting a firmware update on your Z-Wave stick. 
• Expert users only: please note that this product comes with basic hardware support and does not include any tech support for the home automation software or host hardware you decide to pair it with
• Updated command class library: build your Z-Wave software with confidence and support of all of the latest features
• Supports S2 security and SmartStart
• 800 Series Z-Wave Chip: get more signal coverage and improved performance even without the Long Range capability thanks to the latest generation Z-Wave chip
• What you'll need: a dedicated computer and home automation software with mobile interface to build a Z-Wave hub using the ZST39 hardware (not included)
• Check out ZST39 Frequently Asked Questions

NOTE: You'll need a dedicated PC/laptop/Raspberry Pi and Z-Wave home automation software (sold separately) to install this product.

PRODUCT HIGHLIGHTS

• 4 smart buttons: control Z-Wave devices and activate scenes
• Install anywhere: fits a standard decora switch box, sticks to a wall, or keeps handy on your night stand
• No wires: this device is powered by a rechargeable battery for easier installation and low maintenance
• Scene Control (select hubs only): run up to 24 scenes or control up to 24 devices with multi-tap triggers.*
• NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
• Smart bulb control: program the buttons to access your favorite smart bulb presets with just one click
• Magnetic base: take the remote out whenever you need to use it like a traditional remote control and put it back on the base for easy access next time
• Adjustable LED indicator: choose from 7 colors and 10 brightness levels
• White (no other color available)
• S2 authenticated security with SmartStart for the safest and most convenient way to add and manage your Z-Wave devices
• OTA firmware updates for a future-proof device
• Included accessories: mounting screws, adhesive tape, wall plate and switch box screws, triangle tool to open the remote, magnetic base, standard single-gang wall plate (white), and charging cable

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

PRODUCT HIGHLIGHTS

• 4 smart buttons: control Z-Wave devices and activate scenes
• Install anywhere: fits a standard decora switch box, sticks to a wall, or keeps handy on your night stand
• No wires: this device is powered by a rechargeable battery for easier installation and low maintenance
• Scene Control (select hubs only): run up to 24 scenes or control up to 24 devices with multi-tap triggers.*
• NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
• Smart bulb control: program the buttons to access your favorite smart bulb presets with just one click
• Magnetic base: take the remote out whenever you need to use it like a traditional remote control and put it back on the base for easy access next time
• Adjustable LED indicator: choose from 7 colors and 10 brightness levels
• White (no other color available)
• S2 authenticated security with SmartStart for the safest and most convenient way to add and manage your Z-Wave devices
• OTA firmware updates for a future-proof device
• Included accessories: mounting screws, adhesive tape, wall plate and switch box screws, triangle tool to open the remote, magnetic base, standard single-gang wall plate (white), and charging cable

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

PRODUCT HIGHLIGHTS

• Temperature sensor: track air temperature in the room of your choice to adjust your smart thermostat with more accuracy than ever.
• Humidity sensor: get notified if the humidity drops or rises above the set level and trigger your smart (de)humidifier to keep the climate of your sunroom or living room steady.
• Small and discreet: The simple and slim design helps blend the sensor with your interior for the invisible type of monitoring you'd expect from a modern sensor.
• Outside installation: Mount it on your covered porch or under the eve, just make sure to keep it away from direct rain and sun. The mounting bracket is now included with the device and recommended for outdoor installation.
• New 800 series Z-Wave chip: get more range, longer battery life, and quicker reports with the latest technology
• Powered by a single CR2450 battery
• S2 and SmartStart for extra security
•  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH ALARM PANELS) 
• Check out ZSE44 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.